tinySA Ultra ZS405. Screen size 4 inch Spectrum Analyzer for 0.1-800MHz or, with Ultra mode enabled up to 5.3 GHz, level calibrated up to 6GHz. Can observe signals up to 12GHz Signal Generator with sine wave output between 0.1-800MHz or square wave up to 4.4GHz or rf test signal output up to 5.3GHz when not used as Spectrum Analyzer.

2022年12月21日 · In Ultra mode the input low pass filter is automatically enabled for all frequencies within the pass-band of the low pass filter (up to a maximum of 750MHz).

2024年3月21日 · The tinySA and the tinySA Ultra come in a sturdy box for protection during transport. The tinySA Ultra is an advanced model of the tinySA and the instructions below apply to it as well as the original tinySA model (unless specified otherwise below).

2023年3月6日 · The tinySA contains all the components of a conventional heterodyne swept spectrum analyzer and an RF signal generator

How to find my tinySA Ultra version? If you device has "Ultra" at the front it's a ZS405. If it has "Ultra+" you have either a ZS406 or ZS407 and the label at the back specifies which of the two.

Page last modified on February 24, 2021, at 09:52 AM

2024年12月29日 · The input/output specification of the tinySA is split over the 4 modes Low input mode spec: Input frequency range from 100kHz to 350MHz (with some limitations down to 10kHz)

Tapping the LOW OUTPUT button will switch the output on or off ; A short tap on middle of the FREQ button activates a keypad to select the output frequency. The frequency can be set from 100kHz to 800MHz for sine wave output and, depending on the OUTPUT setting up to 4.4Ghz or 5.4GHz ; The left and right of the FREQ button can be used to decrement or increment the …

2024年10月10日 · Connect the tinySA with USB and activate the DFU mode: tinySA: switch the tinySA on and enter DFU mode. tinySA Ultra: press the jog button before switching on the tinySA Ultra. Switch on and the screen should stay black.

2024年9月18日 · To get the dBm level from the 16 bit data, divide by 32 and subtract 128 for the tinySA and 174 for the tinySA Ultra. The option, when present, can be either 0,1,2 or 3 being the sum of 1=unbuffered and 2=continuous