Holding Position Markings. Runway Holding Position Markings. For runways, these markings indicate where aircraft MUST STOP when approaching a runway. They consist of four yellow lines, two solid and two dashed, spaced six or twelve inches apart, and extending across the width of the taxiway or runway.

Mandatory: Holding position for runway approach area. Denotes area to be protected for aircraft approaching or departing a runway. Located on taxiways crossing thru runway approach areas where an aircraft would enter an RSA or apch/ departure airspace. Mandatory: Holding position for ILS critical area/precision obstacle free zone. Denotes ...

2023年4月6日 · Runway holding position signs display the runway designation, such as “27” or “9,” indicating the runway you’re about to enter or cross. The inscription might include a letter (e.g., “L” or “R”) to identify parallel runways (e.g., “27L” or “27R”).

ICAO shares Standards and Recommended Practices (SARPs) for airport signs, runway and taxiway markings, mandatory instruction signs, information signs, mandatory instruction markings, runway holding position markings, etc. via Annex 14, Aerodromes.

2023年4月4日 · Runway holding position markings are the most arguably the most important airport markings used. Runway holding position markings mark the intersection between the taxiway and the runway where aircraft are required to …

Stop prior to crossing this marking unless ground control instructs you to hold. This sign will be placed within 10 ft of the runway holding position marking. Prohibits an aircraft from entering an area, such as a one-way taxiway or the intersection of a road intended for vehicles. position surface markings. Taxiing. arriving or departing aircraft.

Runway/Runway Holding Position: Hold short of intersecting runway. Runway Approach Holding Position: Hold short when instructed to by ATC. ILS Critical Area Holding Position: Hold short when instructed to by ATC. No Entry: Identifies areas where AIRCRAFT entry is prohibited. Taxiway Location: Identifies taxiway on which vehicle/aircraft is ...

2024年9月24日 · On taxiways, Runway Holding Position Markings are four yellow lines—two solid and two dashed—that indicate where to halt before entering a runway. Similar markings on runways are used during specific operations.

2021年12月7日 · Runway Approach Area Holding Position Sign. Pilots and Vehicle operators must stop short of the Runway Approach Area Holding Position Sign, keeping all parts of the vehicle or aircraft clear of the area when instructed by Air Traffic Control (ATC). Reference: AIM ¶ 2-3-8. Sample Diagram

Runway Approach Area Holding Position Sign: Holding Position Sign for a Runway Approach Area; At some airports, it is necessary to hold an aircraft on a taxiway located in the approach or departure area for a runway so that the aircraft does not interfere with operations on …