Also know, is a bisector always perpendicular? When it is exactly at right angles to PQ it is called the perpendicular bisector. In general, 'to bisect' something means to cut it into two equal parts. The 'bisector' is the thing doing the cutting. With a perpendicular bisector, the bisector always crosses the line segment at right angles (90°).

Construct the perpendicular bisector of one side of triangle. Construct the perpendicular bisector of another side. Where they cross is the center of the Circumscribed circle. Place compass on the center point, adjust its length to reach any corner of the …

Both of these two postulates tell you that you have two congruent sides and one congruent angle, but the difference is that in SAS, the congruent angle is the one that is formed by the two congruent sides (as you see, the 'A' is between the two S), whereas with SSA, you know nothing about the angle formed by the two

Install the Furring Strips Use 1x2 or 1x3 furring strips placed perpendicular to the joists. Hold them in place and to avoid splitting the board, drill a pilot hole through it and into the joist . Drive 2 inch drywall screws to fasten the strips to the joist .

Then drill a small diameter hole, approximately 1/16”, through the edge of the cap perpendicular to the first hole so they just meet up. This allows your vessel to vent, and the 90 degree turn helps keep oil or gas from making its way out.

A scale measures the force that the scale is exerting on the object; typically this is a normal force, i.e. one that is normal, or perpendicular, to the surface or the scale. Now, very often, this normal force is equal to the weight, because the object is in equilibrium.

Similarly, what will the scale read? When a person stands on a scale, the reading (the number of pounds or newtons) on the scale is actually the Normal Force that the scale exerts back towards the person to support the person's weight.

Ordinate dimensions measure the perpendicular distances from an origin point called the datum, such as a hole in a part. The datum is established by the current location of the UCS origin. The datum is established by the current location of the UCS origin.

Start Searching the Answers. The question and answer site designed to help people, to help each other: To ask, to learn, to share, to grow.

For furniture less than 30 inches high, hang the mirror as close to eye level as possible, which ranges from 57 to 65 inches from the center of the mirror to the floor.