2010年12月26日 · Jonsered is a Swedish-made chain saw produced by the same company that makes the Husqvarna brand. Troubleshooting them depends on the nature of the problem: the saw won't start, it runs roughly or dies frequently, the chain does not cut efficiently or …

The most common reason for a Jonsered chainsaw oiler not working is a faulty oiler pump. The oiler pump is responsible for sending oil to the chain, and if it is not working properly, the chain will not be lubricated properly and will eventually wear out.

2021年2月1日 · I have this Jonsered CS 2255 which was not right when I bought it new. It came with a 20" long 3/8 x .050 bar and chain, which is still on the saw, but it came from the factory with the wrong drive sprocket. I think it had a .325 on it.

2017年6月15日 · First post. I have a Jonsered CS2250. 2 Years old. Probably cut about 30 facecord per year. Mostly ash in Michigan. After about an hour of operation, the saw stalls. It restarts right away; however, the chain only advances a little with the throttle depressed.

2014年12月30日 · Well me and my jonsered have definitely spent some time together. I've used that thing to heck wouldn't have it. Still running awesome. Same plug and air filter it came with. Second chain (more out of laziness ) and 2 acres cleared, bucked, and brushed out. Absolutely no complaints. Tomorrow morning I go get the big dog.

2010年11月4日 · It sounds like either the bar is wrong or the the bar groove/oil hole is plugged. Screwed around with it again last night, bolted on the bar no chain or cover. Run and watch and the oil channel will intersect the unused adjustment screw hole in the bar slightly.

2015年9月5日 · It can be switched, you would need a new bar, and a new sprocket on the hub. Both should be available. Of course then you will need new chain too. Kind of nice to have all your saws running the same, but not essential. The slightly narrower kerf of the .325 might grow on you, and the chain will pull better on your 2250.

Do not use the chain saw until it has been properly adjusted or repaired. When the carburetor is correctly adjusted the machine accelerates without hesitation and the machine 4-cycles a little at max. speed. It is also important that the chain does not rotate at idle.

Shop OEM replacement parts by symptoms or model diagrams for your Jonsered CS2250 S Chain Saw (2009-02)!

CS 2250 S - Jonsered Chainsaw (2010-07) Parts & Diagrams Parts Lists & Diagrams. Chainsaw. CS 2250 S - Jonsered Chainsaw (2010-07) > Parts Diagrams (15) ACCESSORIES. CARBURETOR. CARBURETOR AIR FILTER. CHAIN BRAKE CLUTCH COVER. CLUTCH OIL PUMP. CRANKCASE. CRANKSHAFT. CYLINDER COVER. CYLINDER PISTON. FUEL …