2003年4月18日 · The original inspiration came from the wing design of the Dyke Delta. But where that plane is a 4-place tractor with the wing in the typical mid-fuselage position, I slid the wing back to the rear of the plane, widened the fuselage and lengthened it …

2010年2月13日 · Going for a little more aspect ratio, a pure delta 24' long and 12' span would give 144 sq ft of wing area. Clipping the delta at the nose and wingtips, a bit like the Nakamura Dart paper airplane, would provide more area and better elevon authority. Visibility except straight up would be quite good and the hangar footprint relatively small.

2006年12月28日 · i've been told that planes using delta wings are impossible to fly without the aid of a computer. Is this correct? also what are the pros and cons of using a delta wing/canard combo? just in case someone hypothetically wanted to …

2010年7月15日 · Or perhaps lack thereof. Thinking about the FacetMobile and the tail design on the Sonex series of aircraft..... Suppose you use all the vortex tricks, and simply make the center portion of the wing flat with the ability to droop the leading …

2003年5月23日 · I do want to be cautious, I can make the front of my fuselage cross section round in order to eliminate the full length strake (ogee) going to the nose (SR-71 style), I can also eliminate the 'double' part of the delta, but would rather just make it smaller. I …

2014年7月13日 · I chose the Verhees Delta because of it's uniqueness and the fact that its a plans built all aluminum design. Purchasing the plans was easy, an email to Bart Verhees and a wire transfer of 400 Euro and my plans were on their way from Belguim. Upon receiving the plans I was pleasantly surprised by their quality.

2013年1月1日 · The latest issue of KitPlanes , July 2022 has an article about the Verhees D2 Delta. Two place side by side with a 100 hp engine. Have seen the Dyke's Delta at a few fly-in's in the past. Also I designed and built a RC Delta back a long time ago when fly reeds radio equipment . 40" span and a single large fin with ailerons and elevator, no rudder.

2010年2月13日 · The configuration brings to mind everything from Neal Loving's "Loving's Love" classic homebuilt racer to Richard Vought's prototype Blohm & Voss Ha 137 prototype attack aircraft to the legendary Vought F4U "Corsair" to name just a few. For a small, single-seat or two-seat light aircraft, the inverted gull wing does seem to offer a few advantages:

2012年8月10日 · Right now what I am finding difficult is toning down the speed on such a vessel and coping with the lift and drag. I want to role with a traditional trike set u with a delta wing above it. But from what I understand a delta wing trike normally has a flexing wing which would be darn near impossible with aluminum wings.

2014年7月7日 · Working on our flying wing project, our elevon mixer, in its current form, is inspired from a Beech Bonanza V-Tail ruddervator mixer. We know it will work great, but we are curious to know how the Dyke Delta's mixer is laid out.