[SOLVED] Sata HDD not detected in BIOS (all SATA ports are …
2019年7月2日 · If you have a SATA-based SSD in M2A, you lose SATA port #1, regardless of whether the port is "enabled" in the BIOS. If you have a SATA or NVMe SSD in M2M, you lose SATA ports #4 & #5 - again, regardless of the enabled/disabled status in the BIOS.
How to tell if my SATA ports are not working - Tom's Hardware …
2011年10月11日 · Make sure you use a known working SATA cable and power cable and make sure these are connected and seated properly to the hard drive and motherboard. If the same problem happens for at least 2 drives, try flashing your BIOS.
What do you use SATA ports for? : r/buildapc - Reddit
2020年5月26日 · You Sata controller probably supports up to six drives. There isn't really a reason for the motherboard manufacturers to put less ports then the controller can handle, as the cost is pretty marginal.
Can i use a SSD SATA III DRIVE CONNECTED TO SATA II PORT?
2011年10月10日 · Yes, you can connect a SATA 3.0 6Gb/s solid state drive to a SATA 2.0 3 Gb/s port on your motherboard. The SATA 3.0 6Gb/s ssd's are backward compatible with SATA 2.0 3Gb/s ports. However, performance will be restricted to SATA 2.0 levels.
[SOLVED] Help with M.2 slots and how they affect SATA ports.
2020年8月6日 · Hello! I'm on PC Part Picker and I got this compatibility message: "The motherboard M.2 slot #1 shares bandwidth with a SATA 6.0 Gb/s port. When the M.2 slot is populated, one SATA 6.0 Gb/s port is disabled." I'm unsure if this is going to affect me or not because I am inexperienced and I do...
Does it matter which SATA ports I use? - Tom's Hardware Forum
2013年7月19日 · Hey guys, I'm working on my rig, and I just got the Optical drive in, and I noticed that the motherboard's instruction manual does not give any indication as to which sata ports I should plug my ODD and HDD into first (it was much more specific with the RAM and GPU slots, saying that some slots...
Which is the Sata0 port? - Tom's Hardware Forum
2015年3月25日 · Yes - any port. You just set the boot order in the BIOS if you have more than one disk. If you only have the one disk, that's it. Some motherboards have two different SATA controllers and in that case it might matter which port you plugged a drive into (for example, you would want to ensure that you plugged an SSD into a SATA 3 port).
Do SATA Port numbers matter? - Tom's Hardware Forum
2014年1月29日 · Manufacturers recommend putting SATA III drives in certain ports and some recommending putting boot drives in certain ports. This is all dependent on your motherboard's manufacturer. Just make sure to read the instructions carefully. And putting SATA III drives on a SATA II port is fine, you'll just be wasting the potential of your SATA III device.
Which Sata port to use? White , Black or Blue - Tom's Hardware …
2013年7月27日 · I have a Dell Motherboard which has 3 sata ports white , blue black. My HDD was already installed in Blue but which one is faster?
How to tell which SATA port a HDD is connected to - Tom's …
2015年4月15日 · I have an ssd and 4 WD 1TB HDDs (same models, different data) installed in my machine...I want to upgrade one of the HDD to a 4TB one...how do I know which SATA port it is connected to? Bios just shows the model numbers...do I have to plug and unplug until I …