Don't throw away an older traverse curtain rod just because the cord is broken. Watch this video to find out how to restring your traverse curtain rod. Visit LindasCurtainStudio.com for more...

2012年7月22日 · Knowing the pieces of a traverse curtain rod makes restringing one less confusing. Each rod is made with an open track along the back side. This track lets components slide, which opens and closes the drapes. There is a set of two pulleys mounted on one end of the rod, then a row of small sliders in the track.

2009年6月25日 · This is a very good video demonstration of how to restring a traverse rod. The rod he is working with is called a two-way stack or center draw. A one-way stack rod draws everything off to one side and only has one carrier – the one where you tie the knots. If playback doesn't begin shortly, try restarting your device.

You need to remove curtains, take down track, run cord from overlap arm through pulley back under underlap arm through the pulley at the other end, leaving enough slack so cord hangs down far enough to be able to pull, back to under lap arm. attach cord to both overlap arm and tie off ends to underlap arm. replace track, rehang curtains.

Re-attach track onto brackets and re-hang curtains. This method will give you a right hand cord drop. If you require a left hand cord, just reverse all operations above. Follow the instructions on this page to re-cord your existing curtain tracks.

To restring a curtain rod, follow the example images and use the pattern as a guide for split draw or one-way draw drapery rods. Make sure the master carriers are at the center point of the curtain rod.

2013年4月24日 · Traverse curtain rods are making a strong comeback because they are an inexpensive solution to opening and closing large window treatments. The traditional traverse rod is not a particularly attractive rod, but new traverse rods are available that are integrated into the back of decorative rods.

2023年2月2日 · Rethreading curtain cord is a simple and cost-effective way to repair and extend the life of your curtains. It involves removing the existing cord from the eyelets, replacing it with new cord, and re-threading the cord through the eyelets.

Below are the instructions for assembling the Swish Superluxe curtain track. Its in three parts, the first dealing disassembling your track, the second assembling a track corded from both sides, starting around 3 minutes into the video, the third assembling tracks corded from one side only, starting around 10.5 minutes.

NOTE: Cord should be tensioned so that the Tension Pulley is slightly extended. NOTE: To fine tune the position of the master sliders, un-hook the loop of cord from the Slave Master Slide. Pull cord until the Overlap Master Slide is in the correct (center positon). Move Slave Master Slide so that is sat next to the Overlap Master Slide.