2015年7月31日 · Thermocouple- it's a probe that uses two different metals joined at a point (the actual thermocouple), that junction generates a small voltage in relation to the temperature, that's why AJ said they are active. There are many types out there with different metals making the probe. Most common are type K and type J.

2007年10月21日 · Hey everyone, I have seen a one or two peoples pictures of their kegerators/keezers and the temperature contoller thermocouple is submerged in a liquid, either water or ice-pack gel. Is this superior to having the thermocouple sensing the ambient temperature of the freezer? Is the liquid a simulation of what the beer temp is inside the kegs?

2009年4月6日 · A thermocouple is a junction between two different metals that produces a voltage related to a temperature difference. When the junction of the two metals is heated or cooled a voltage is produced that can be correlated back to the temperature

2020年5月18日 · apropos question. I just got some of that wire to set up my franken build controller, which is an auber cube witth the DSPR output control circuit routed outside the box to a male and female plug.

2014年4月19日 · Which temp sensor is going to give the best performance. The DS's have a much narrower range and output directly in centrigrade. simple + and - 5 VDC and a digital out. The K-Type thermocouples are are 2 wire through the sensor wiring set up with a much larger range. Is the large range going...

2018年10月23日 · Im on the last step of wiring up a pretty simple control panel. Can someone explain to me how to correctly connect this Uxcell K Type -50C to 260C Temperature Controller RTD Thermocouple Sensor 2M to this.. Female XLR3 (3 pin) cable connector and if you would be so kind to explain the...

2012年11月13日 · Try removing all the jumpers from 8-9 and from 7-10 and just hook the thermocouple up to 7 and 8 or 7 and 9 depending on type. But it looks like a k-type thermocouple. Even if you had a pt100 you wouldn't need those jumpers the diagram on the side of the pid is telling you to put resistors in but most thermocouples have the resistor inline so ...

2012年11月17日 · 1. It would go out as soon as I took my finger off the button as if the thermocouple was bad. 2. It would stay lit when I took my finger off the button but would go out as soon as I put a pot on the burner. 3. It would stay lit but would go out within 5 seconds of setting the pot on the burner.

2013年9月25日 · 1 - Drill 2 - Female end of extension cord (Cooler) 3 - Female end of extension cord (Heat source) 4 - Male end of extension cord (Power for unit)

2024年12月19日 · I opened my chiller to remove a thermocouple and the glycol smells like butterscotch. Well, I think it smells. Like butterscotch. As the resident brewer I grabbed a glass and then asked the family individually what it smelled like and I got: sourdough, algae, cream cheese. The real question is, I need to flush the lines and the jacket. Any tights?