2009年3月8日 · The backplane itself is not intelligent; it still needs to be plugged into a RAID controller that supports SAS or SATA. There are controllers for SAS, for SATA or for both. For every drive connected to the backplane, there will be a cable from the "inside surface" of the backplane to the controller, and possibly another to the power supply for ...

2008年12月8日 · I'm in the middle of modding my HP N36L and looking for a way to use the onboard SATA port or the external eSATA to connect roughly 4 drives (SSDs). I used both of the PCI-E slots so it can't be an add-in card. I also have no room for any bay devices either. I have been looking for cheaper...

2004年6月29日 · Compare the 743T - it has a "SAS / SATA Hard Drive Backplane" rather than a "4 x 1" SATA Backplane". This may be a miscommunication between tech and management folks. Take a look at the inside - if the connectors are sort of conjoined, they're sas compatible, but if there's a separation between power and data connectors it's sata only.

2010年4月23日 · I am looking at purchasing a Supermicro SC825TQ-560LPB chasis with a SAS/Sata backplane. I am using a desktop motherboard without a raid controller, so I only have regular SATA ports. How do I connect from the motherboard to this backplane, can I just user 8 SATA cables or do I need...

2005年10月9日 · backplane enterprise sas sata Feb 19, 2016 #1 B. BecauseScience [H]ard|Gawd. Joined Oct 9, 2005 Messages ...

2019年2月11日 · Some drives have used it actually. I have some older SSDs that are 3.3V only. Some newer SSDs also are 12/3.3V (Intel 750 for example) and can take SATA power via an adapter. 3.3V is still in the SATA spec using pins 1 & 2. …

2011年9月1日 · I have hooked up 4 SATA ports on the M/B to the SAS backplane of a SuperMicro SC847 chassis with a reverse breakout cable. Only thing is, M/B BIOS or the ICH10R SB doesn't detect any of the drives connected to the chassis backplane. However a 2.5" drive I connected directly with a SATA cable to SATAport-4 [5th SATA port on M/B] is detected ...

2009年1月13日 · SATA backplane boards. Thread starter LoneWolf; Start date Jan 12, 2009; Jan 12, 2009 #1 L. LoneWolf 2[H ...

2004年8月4日 · When it comes to supermicro chassis with SAS1 expanders there is a known issue with drives larger than or equal to 3TB. To alleviate this ensure that either the backplane uses sata connectors or that it is SAS2. The easiest way to figure this out is to check the parts list on any chassis you are interested in, and make sure it uses a SAS2 ...

2012年11月27日 · If pin 11 is high or floating (as provided by most backplanes, but NOT standard sata power connectors) the drives will do staggered spin-up controlled by backplane. If pin 11 is grounded then it'll spin up immediately. Now, after spin-up, pin 11 is used to indicate activity LED's for most drives. Again, this wont work unless the backplane ...