Released as the expansion bus of the Commodore Amiga 3000 in 1990, the Zorro III computer bus was used to attach peripheral devices to an Amiga motherboard. Designed by Commodore International lead engineer Dave Haynie, the 32-bit Zorro III replaced the 16-bit Zorro II bus used in the Amiga 2000.

The Zorro III bus is a performance 32 bit expansion bus that is also upward compatible with the Zorro II bus (Amiga 2000 expansion bus). The main intent of the Zorro III bus is to allow fast 32 bit peripherals and memory devices to be added to a high performance Amiga, such as the Amiga 3000, while at the same time allowing standard Zorro II ...

Zorro III was introduced with the Amiga 3000, and was in the Amiga 3000 Tower, Amiga 4000 and Amiga 4000 Tower. It was mainly backwards compatible with the Zorro II expansion standard, but increased the address space in which it could operate, …

The Zorro III bus is a performance 32-bit expansion bus that is also upward compatible with the Zorro II bus (Amiga 2000 expansion bus). The main intent of the Zorro III bus is to allow fast 32-bit peripherals and memory devices to be added to a high performance Amiga, such as the Amiga 3000, while at the same time allowing standard Zorro II ...

Designed by Commodore International lead engineer Dave Haynie, the 32-bit Zorro III replaced the 16-bit Zorro II bus used in the Amiga 2000. As with the Zorro II bus, Zorro III allowed for true Plug and Play autodetection wherein devices were dynamically allocated the resources they needed on boot.

2003年11月17日 · Amiga History Guide: Seven internal expansion slots (5x 100 pin Amiga Zorro II and 2 x 16-bit ISA slots). The ISA slots were disabled by default (only power and ground pins activated), but could be used when a Commodore bridgeboard was installed (a PC-on-a-card). Inactive slots can be used for non intelligent cards like TBCs or fan cards.

4 GB continuous PCI memory space accessed through the 512 MB window in the Zorro III address space ready for installation of the SharkPPC G3/G4 and SharkPPC+ G3/G4 processor cards

2010年6月27日 · Zorro III is 32-bit (much better); Zorro II is 16-bit. But if I recall, virtually all older Zorro II cards will work on III -- and not necessarily vice-versa!

Autoconfig is part of the Zorro II and Zorro III expansion bus specification for configuring expansion devices in Amiga systems. Zorro II was first used in the Amiga 2000, though a similar expansion bus is present on the Amiga 1000.

For any Amiga model with Zorro II/III busboard. Buddda is an IDE controller for Amiga 2000, 3000 (T), 4000 (T), or any Amiga model with Zorro slots. It supports until 4 IDE devices. New Buddha controllers have implement a small technology update …